Muzzle Velocity Test Radar

• 详细介绍
• 详细参数

• 详细介绍

  ED-2305C compact shell velocity test radar system

  
  

  The processor also receives commands and sends the results to the connected fire control system or data display terminal. The system allows pre-programmed ammunition types and combinations of calibers and ammunition use. These settings are stored in non-volatile memory so that triggering can be performed without reconfiguring the settings. Fire control system interface/data display terminal interface.

  The radar unit is connected to the fire control system computer or data display terminal through USB, RS-422 and RS-232 serial data communication interfaces. An Ethernet interface is also provided.

  
  

  Packaging and installation

  The ED-2305C system is a compact, rugged, and completely solid-state electronic component.

  Meet the application environmental conditions of the Army and Navy for MIL-STD-810.

  It can be mounted on a weapon on a customized stand.

  A set of elastic shock absorbers for the radar is provided as a standard installation accessory.

  
  

  
  

  electricity supply

  The system uses a DC power supply (10-36v DC) to work.

  
  

  System installation and integration

  ED-2305C is designed for gun installation and connection with gun fire control for real-time accurate muzzle velocity measurement system for gun control.

  
  

  The system is installed on a custom bracket (the details of bracket installation are determined by the manufacturer).

  A cable provides DC power and data interface for the system. Cable installation is usually completed by the artillery system integrator during the artillery installation process, but existing artillery systems can also be modified.

  The computer interface includes a simple command set through which the fire control computer can control the radar unit and receive muzzle velocity measurement and statistical data. The command set of the fire control computer is defined in the document E62-QS007 interface specification (available on request).

  
  

• 详细参数

  Shooting speed: continuous shooting 1500 rounds per minute

  MV results can be launched within 40 milliseconds

  Cannonball Any model, from 4.5 mm (0.177 inches) to 155 mm or larger

  Base-Bleed, Discarding Sabot, Flare and Tracers

  Muzzle velocity (MV), mean and variance of MV, lag

  Measuring range 30 m/s – 3 000 m/s (100 fps – 10,000 fps)

  Accuracy better than 0.05%

  Accuracy better than 0.05%

  Principle of operation Continuous wave Doppler radar has real-time Fourier transform and statistical data

  Determination of initial velocity and processing of related measured values

  Operating frequency X-band (single frequency-model 2305C) or 16 channels from 10.45 GHz to 10.6 GHz-software optional-model 2305CM)

  Transmission power (nominal) 500 mW (+27 dBm)

  Antenna gain (nominal)> 20db (transceive)

  Antenna beam width 10°x 20°(horizontal/vertical)

  Polarization linear

  Processor module Digital signal processor; user-defined ammunition types are stored in non-volatile memory; average MV for each ammunition model, compensation for charging temperature and projectile weight

  Data storage up to 4000 rounds of measurement

  Data interface RS422 or RS232 serial port and Ethernet data interface for fire control or data display

  Power input 10-36V DC; power consumption <500 mA @ 24V DC; mil-std-1275 d

  Dimensions and weight 211 x 186 x 83 mm (8.3” x 7.3” x 3.3”)

  6 kg (13 lbs)

  Manufacturing process Anodized aluminum construction; solid electronic environmental protection hardening

  
  

• 产品特色

  因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。

• 详细介绍

  AutoCal系统提供在线的机器人校准方案，旨在快速和自动地保证机械设备的工作性能。因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。这意味着不用猜测哪里会出错，不用浪费宝贵时间在机器人程序重复校准上，产品品质无任何损失。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。