Mossbauer spectrometer

• 详细介绍
• 详细参数

• 详细介绍

  Advantages of MS-96 third-generation Mossbauer spectrometer:

  1. We have more than 20 years of experience

  2. We provide a complete set of Mössbauer spectroscopy system technical support

  3. The linearity is less than 0.1%, which is 8% higher than the traditional line width. At present, our line width can reach 0.27nm, and we are innovating technology to reach 0.22-0.23nm in the future.

  4. The quality of the tested Moss spectrometer has increased by 15%; the detection area can reach 500mm2, and the test speed is twice as fast as that of the traditional Mossbauer spectrometer, so the efficiency has also increased by 15%.

  5. It can penetrate the sample and is equipped with a dual detection system, which can not only test the surface of the sample at one time, but also test the internal Mössbauer spectrum of the sample.

  6. The integrated compact model has overturned the traditional Mössbauer spectrometer's huge appearance. We set the frequency to the commonly used 35Hz-40Hz so that the Mössbauer spectrometer can be plug and play at any time in the future.

  7. Integrate all the huge and cumbersome accessories and cables on the PCB board, while the whole device of the Czech MU spectrometer has only 4 wires, which reduces the noise very well.

  8. There is no need to buy a shielding box. The whole accessories of our Muspectrometer are shielded by lead protection, so the noise is smaller, the signal-to-noise ratio is higher, the radiation is smaller, and it is safer.

  9. The controller not only integrates the computer host, but only needs to connect to the display; the controller can also be connected to a network cable to remotely view the test of Mupu in real time at any time.

  
  

  MS-96 third-generation Mössbauer spectrometer complete system solution

  
  

  Based on resonance emission and absorption of gamma rays.

  Used to study various sample types (including nanomaterials and bulk materials) and specific nuclei.

  Non-destructive analysis technology

  Necessary radioactive source

  
  

  Typical Mössbauer transmission experiment configuration

  We can provide the following customized experimental devices:

  Low temperature measurement

  High temperature measurement

  Magnetic field test

  
  

  Hardware Configuration

  This is designed for the third generation Mössbauer spectrometer

  Dedicated hardware device provides complete signal processing and spectrum accumulation

  
  

  The stand-alone version includes:

  Smart nuclear detector

  Speed sensor with built-in analog speed feedback controller

  Spectrophotometry

  Independent main unit

  Smart nuclear detector

  Speed sensor with built-in analog element feedback controller

  Spectrophotometry

  
  

  Smart nuclear detector

  Equipped with a complete set of detection unit transmission measurement signal processing unit

  Transmission measurement provides information about sample volume

  Internal function control, all operating parameters are stored by a microcontroller

  Preamplifier and amplifier

  Internal temperature control

  Scintillation detector

  High voltage power supply

  
  

  Electron conversion ray detector

  
  

  Electron converted ray test provides sample surface information

  Conversion measurement design of gas flow detector

  
  

  speed sensor

  Magnet-based electric speed sensor

  Includes integrated speed feedback controller

  
  

  Electronically controlled high voltage power supply and signal amplifier

  Function application of standard NIM or independent space standard SHV connection USB interface control

• 详细参数

• 产品特色

  因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。

• 详细介绍

  AutoCal系统提供在线的机器人校准方案，旨在快速和自动地保证机械设备的工作性能。因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。这意味着不用猜测哪里会出错，不用浪费宝贵时间在机器人程序重复校准上，产品品质无任何损失。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。