Drilling simulator

• 详细介绍
• 详细参数

• 详细介绍

  Introduction

  The CS drilling simulator is a device that uses computers and physical simulation equipment to reproduce the drilling process based on the established mathematical model of drilling engineering. It can simulate drilling, cementing, completion, well control, workover and other related drilling operations in drilling engineering. Equipped with a "single point" electronic system and a multi-stage downhole model, the equipment is more reliable and authentic. It can be used to perform drilling simulations on land and ocean plates.

  
  

  basic skills

  Multiphase, MultiKickWell

  Drilling method, parallel processing method, low resistance flow method & volume method

  Drilling practice

  Drilling and drilling operations

  Formation test

  Leakage and pit experiment

  Bullheading operation

  Primary well control

  Regular circulating fluid/gas leaks.

  Reverse circulation fluid

  Pipe laying

  TrippingandStrippingPipe

  Cementing operation

  Stuck prevention

  
  

  special function

  Control Mud Report after Control Mud

  Student Control Desander

  Reduce sediment

  Mud cleaning

  Centrifuge

  Mud shaker

  Mixing and storage container

  Cementing operation in HMI mode.

  Directional drilling operations:

  Horizontal projection

  Vertical projection

  Dynamic three-dimensional display

  Menu for bottom hole selection

  Survey selection

  Abnormal pore pressure test

  
  

  Equipment advantages

  The industry's highest requirements

  Easy to maintain

  High flexibility

  Ultra-high-level simulation

  Simple operation guidance

  The most realistic downhole model

  Multiple choice modules

  oil,

  Water source or mixture

  Gas and liquid mixing

  Reacting gas through choke coil

  Realistic migration and expansion

  The best after-sales support in the world

  Single point I/O

  Automatic test equipment

  Software calibration

  Joystick and traditional handbrake

  
  

  Customer groups

  San Marco's University

  University of Texas

  Vocational Schools in New Mexico

  Hobbs New Mexico

  Norwegian Petroleum Training Center (NPS)

  Norway-Stavanger, Bergen, Norway

• 详细参数

• 产品特色

  因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。

• 详细介绍

  AutoCal系统提供在线的机器人校准方案，旨在快速和自动地保证机械设备的工作性能。因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。这意味着不用猜测哪里会出错，不用浪费宝贵时间在机器人程序重复校准上，产品品质无任何损失。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。