Ice detector

• 详细介绍
• 详细参数

• 详细介绍

  Features and advantages

  Freezing and freezing rain monitoring

  Analysis and resolution of mixed state of ice and water

  Ice detection: 0.01 mm to 80 mm ice thickness detection

  Different versions of sensors for different applications, square detectors and rod detectors

  Reliable observations

  Suitable for existing or new system installation

  No maintenance, low cost

  
  

  Parameters measured:

  -Icing

  -Freezing rain

  -Dew point, frost point

  -Air temperature and humidity

  Analysis: number and duration of icing

  
  

  The ice detection sensor IDS-20, with cube-shaped and rod-shaped detectors, is used for reliable and accurate ice detection. It is suitable for aviation, wind power plants, high-voltage wires, cable cars, wires, overhead wires, streets, buildings, etc. . Provide users with various functional services such as freezing rain prevention and ice freezing warning.

  
  

  Measuring principle

  The innovative ice sensor utilizes the different physical properties of air, water and ice at different frequencies. By measuring the complex impedance of the medium surrounding the sensor, IDS-20 can distinguish between water and ice, thereby identifying the formation of ice. Increased data quality Self-check The formation and increase of ice depends on specific climatic conditions, which are determined by the air temperature, humidity and surface temperature to which the ice is attached. Now, the unique and very valuable feature of IDC-20 is that it additionally considers meteorological data for reasonable inspections:

  
  

  The system is parallel to the ice sensor, measures the air temperature and humidity, and calculates the dew point and frost point. Then, the sensor system checks the plausibility of these data together with the measured ice value. Therefore, it is possible to increase the reliability of the measurement in quality and improve the ice detection result.

• 详细参数

  Sensor type cube sensor 5 cube sensor 1 rod sensor 80 ice layer

  Thickness measuring range 0.1 ... 5 mm 0.01 ... 1 mm 1 ... 80 mm

  Weight 0.7 kg 0.7 kg 2.3 kg

  Length 560 mm 560 mm 580 mm

  
  

  Dew point -20 ... +20 °C

  Freezing point -20 ... +20 °C

  Air temperature -40 ... +60 °C

  Air humidity 0 ... 100%

  Weight 0,715 kgs

  Dimensions (mm) 310 x 120 x 165 (H x W x D)

  
  

  Weight 3.6 kg

  Dimensions (mm) 318 x 208 x 132 (L x W x D)

  Waterproof IP 66

  Operating temperature range -40 ... 60 °C

  Power supply Ice detector: 10 ... 28 VDC | heating: 24 V AC/DC

  Power active measurement: 50 mA at 12 VDC | heating: max. 7 A at 24 V AC/

  DC output

  Icing: SDI-12; RS 485 (Modbus)

  three relay-outputs: rain, ice, failure

  Other integrated lightning protection; integrated overvoltage protection

• 产品特色

  因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。

• 详细介绍

  AutoCal系统提供在线的机器人校准方案，旨在快速和自动地保证机械设备的工作性能。因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。这意味着不用猜测哪里会出错，不用浪费宝贵时间在机器人程序重复校准上，产品品质无任何损失。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。