Fuel cell stack assembly press

• 详细介绍
• 详细参数

• 详细介绍

  The assembly quality of the fuel cell stack has a very important influence on the performance of the battery. The stack assembly process will affect the internal resistance of the stack and uneven fuel distribution due to stress.
  

  The existing technology mainly has the following shortcomings:

  1. If each single cell is not properly positioned during assembly, it is prone to assembly misalignment, which will cause uneven forces within the fuel cell stack, affect the seal, or even damage the membrane electrode assembly and the electrode plate.

  2. Accumulation of positioning and machining tolerances will cause slight distortion of the vertical force applied to the battery pack. This distortion will cause relative displacement between the MEA component and the bipolar plate, affect the size and shape of the utility pipe, and cause fluid between single cells. Uneven distribution.

  3. The controllability of the pressure applied during the packaging process is poor, and it is easy to cause damage to the membrane electrode and the electrode plate.

  4. In the process of using the screw to tighten, the screw will provide a certain pressing force, and the pressure sensor cannot be the actual pressure inside the reactor. At this time, if you simply rely on the feedback control of the pressure sensor to apply a constant pressure to the stack to assemble the stack , It is easy to cause damage to the membrane electrode and the electrode plate.

  
  

  Now our company provides a fully automatic fuel cell stack assembly press, which can realize rapid fuel cell stack assembly. And can be customized according to customer requirements.

  
  

  Stack assembly press-fit ─ 50 to 120 kN

  
  

  Stacks are usually built for 3-axis alignment guidelines, using gravity to maintain alignment.

  The long-stroke press includes a removable fixed rod to prevent the stack from buckling under load.

  The servo-driven press can hold the force as a stack compression, or hold a spring-loaded component at a fixed height.

  Includes base console for operation

  Custom leak test interface included in the tool

  Pivot angle (elevation angle) hydraulic control

  
  

  Need to know the parameters:

  The size or outline of the stack, and indicates the alignment-related data (if known). We will design the key parts of the press around your stack and the data you define.

  The required stroke, or the height of the finished product stack

  Required pressure capacity (50 to 120 kN)

  Required tooling angle (up to 40°)

  Floor space or height restrictions

  The required stroke, usually about 300mm

  Required pressure capacity (20 to 60 kN)

  Required tooling angle (up to 30°)

  
  

  Briquetting and leak detection system

  Custom leak test interface included in the tool

  Pivot angle (elevation angle) hydraulic control

  The size or outline of the stack, and indicates the alignment data (if known). We will design the key parts of the press around your stack and the data you define.

  This efficient pivot press is also called a small stack assembly press and is designed to help build and test short stacks to be assembled into large stack assemblies.

  You can increase throughput by running multiple cell block presses in your row.

• 详细参数

• 产品特色

  因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。

• 详细介绍

  AutoCal系统提供在线的机器人校准方案，旨在快速和自动地保证机械设备的工作性能。因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。这意味着不用猜测哪里会出错，不用浪费宝贵时间在机器人程序重复校准上，产品品质无任何损失。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。