50 mm sample measuring rod

• 详细介绍
• 详细参数

• 详细介绍

  Compatible with systems such as Oxford Instruments TeslatronPT and Cryogenic Limited CFM.

  It can be mounted in a sample cavity with an inner diameter of not less than 50mm, providing multi-dimensional electrical transport, thermodynamics, magnetism and optical experimental measurement methods.

  
  

  Rotate the measuring rod

  Rotator Probe

  The standard configuration

  • Rotation range: -5° to 365°, continuously adjustable;

  • Angular resolution: better than 0.01°;

  • Angle control: manual or remote control, equipped with stepper motor and controller;

  • Applicable temperature range: 1.5 K~320 K;

  • Temperature control stability: +/-5 mK at low temperature, equipped with a cold screen to improve temperature stability;

  • Sample holder: 24-pin high thermal conductivity sample holder with sample area size of 12.5 mm x 12.5 mm;

  • Signal measurement line: 12 pairs of phosphor copper twisted pair, 24-pin Lemo connector at room temperature, insulation resistance between channels is higher than 10 Gohm;

  • The sample is placed in the exchange gas environment of the sample chamber;

  • Sample holder length: adapt to user system requirements

  Configuration:

  
  

  Two-axis rotating measuring rod

  3D Rotator Probe

  The standard configuration

  • Rotation range: Spindle: -5 to 185°. Secondary shaft: -5° to 365°, continuously adjustable;

  • Angular resolution: better than 0.5°;

  • Angle control: manual or remote control, equipped with stepper motor and controller;

  • Applicable temperature range: 1.5 K~320 K;

  • Temperature control stability: +/-5 mK at low temperature, equipped with a cold screen to improve temperature stability;

  • Sample holder: 16-pin high thermal conductivity sample holder with sample area size of 10.5 mm x 10.5 mm;

  • Signal measurement line: 8 pairs of phosphor copper twisted pair, 24-pin Lemo connector at room temperature, insulation resistance between channels is higher than 10 Gohm;

  • The sample is placed in the exchange gas environment of the sample chamber;

  • Sample holder length: adapt to user system requirements

  
  

  Fixed measuring rod

  Fixed Probe

  The standard configuration

  • Applicable temperature range: 1.5 K~320 K;

  • Temperature control stability: +/-5 mK at low temperature, equipped with a cold screen to improve temperature stability;

  • Sample holder: 24-pin high thermal conductivity sample holder with sample area size of 12.5 mm x 12.5 mm;

  • Signal measurement line: 12 pairs of phosphor copper twisted pair, 24-pin Lemo connector at room temperature, insulation resistance between channels is higher than 10 Gohm;

  • The sample is placed in the exchange gas environment of the sample chamber;

  • Sample holder length: adapt to user system requirements

  Configuration:

  
  

  High pressure rotating measuring rod

  High Pressure Rotator Probe

  The standard configuration

  • Rotation range: -5° to 365°, continuously adjustable;

  • Angular resolution: better than 0.1°;

  • Angle control: manual or remote control, equipped with stepper motor and controller;

  • Applicable temperature range: 1.5 K~320 K;

  • Temperature control stability: +/-0.05 K at low temperature, equipped with a cold screen to improve temperature stability;

  • Pressure range: 0-100 GPa;

  • Signal measurement line: 6 pairs of phosphor copper twisted pair, 12-pin Lemo connector at room temperature, insulation resistance between channels is higher than 10 Gohm;

  • The sample is placed in the exchange gas environment of the sample chamber;

  • Sample holder length: adapt to user system requirements

  
  

  Optical measuring rod

  Spectroscopy Probe

  The standard configuration

  • Can be used for fluorescence spectroscopy, fluorescence lifetime, Raman and confocal microscopy applications

  • Applicable temperature range: 1.5 K~320 K;

  • Sample holder: 8-pin high thermal conductivity sample holder with sample area size of 8 mm x 8 mm;

  • Signal measurement line: 4 pairs of phosphor copper twisted pair, 8-pin Lemo connector at room temperature, insulation resistance between channels is higher than 10 Gohm;

  • The sample is placed in the exchange gas environment of the sample chamber;

  • Sample holder length: adapt to user system requirements

• 详细参数

• 产品特色

  因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。

• 详细介绍

  AutoCal系统提供在线的机器人校准方案，旨在快速和自动地保证机械设备的工作性能。因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。这意味着不用猜测哪里会出错，不用浪费宝贵时间在机器人程序重复校准上，产品品质无任何损失。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。