PICO N2O Sub-ppb Sensitivity Analyzer

• 详细介绍
• 详细参数

• 详细介绍

  Basic Introduction:

  The Pico CO/N2O analyzer is a giant leap forward in gas sensing : sub-ppb sensitivity, CO measurement displaying an absolute accuracy at the ppb level without the need for temperature control, no calibration required, real time and autonomous operation, extreme linearity over multiple decades of concentration, portable, battery-powered, and at a fraction of the cost of analytical solutions displaying comparable performance.

  In addition of sharing all the great features of the MIRA Pico platform, the Pico CO/N2O analyzer uses a unique and proprietary differential approach allowing to cancel out temperature-induced drifts in the reported CO concentration. The system uses a dual inlet valve switching continuously back and forth between the unaltered air sample and the CO-scrubbed sample. The result is an unprecedented analytical tool reporting carbon monoxide concentration at ppb-level accuracy in real time (1 measurement cycle per minute).

  
  

  Product Advantages:

  Real-time, sub-ppb/s sensitivity

  Autonomous, built-in calibration for CO

  1 or 2Hz operation

  GPS ready for creating N2O/CO “maps”

  Built-in wifi, RS-232, and optional analog out

  Lowest, 15W power consumption

  Maintenance-free sensor, User-serviceable filters

  Built-in 6hr battery, built-in sampling pump

  Compact2.75kg Lab-In-a-Lunchbox

  
  

  Application：

  Atmospheric Studies

  Combustion Studies

  Emission Monitoring

  Indoor air quality monitoring

  Automotive emissions

• 详细参数

  Specification

  Reporting of CO concentration with sub-ppb precision and ppb-level absolute accuracy every minute

  High precision measurement of water vapor, reporting of CO and N2O in dry mole fraction without the need for drying or data corrections

  Ultra-portable: 11.5” x 8” x 3.75”

  Under 3 kg (6 lbs) with batteries

  Ready to measure one minute after pressing the start button

  Full absorption spectrum always visible

  Ultra small 60 cc cell volume for instantaneous response and sharp signals when measuring transients

  Autonomous and continuous operation

  1 Hz default reporting and data logging

  15 W power consumption (standard conditions)

  On-board Li-ion batteries provide 6 hours of continuous use (standard conditions)

  Linear response over a wide concentration range spanning multiple orders of magnitude (typically ppb to thousands of ppm)

  On-board data storage allowing for years of operation before removing oldest data

  User interface accessible from any WiFi-enabled device

  Data logged in spreadsheet format accessible over WiFi network or USB drive

  Data stream from analyzer via serial RS-232 cable or wireless UDP communication

  Cellular modem for remote access where cell phone coverage is available

• 产品特色

  因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。

• 详细介绍

  AutoCal系统提供在线的机器人校准方案，旨在快速和自动地保证机械设备的工作性能。因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。这意味着不用猜测哪里会出错，不用浪费宝贵时间在机器人程序重复校准上，产品品质无任何损失。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。