上海埃飞科技
Worldwide Technology(S. H)产品展示
NNi Complete Suite of Nanopore Tools
Basic Introduction: NANOPORE LABORATORY STARTER PACKAGE Everything you need to fabricate solid-state nanopores in a convenient and affordable package. The starter package includes: Spark-E2 nanopore fabrication hardware Flow cells for at least 20 ex
Product Advantages:
FULLY AUTOMATED: Our tools completely automate the fabrication process, allowing you to make and quality control nanopores with the push of a button.
AFFORDABLE AND ACCESSIBLE: Our instruments deliver functional nanopores for a fraction of the cost and effort of other methods.
ACCURATE AND PRECISE: Our optimized protocols deliver nanopores with sizes in the 1-30 nm range automatically, with sub-nm precision.
Application:
Northern Nanopore's mission to accelerate solid-state nanopore research began with our patented controlled breakdown method for fabricating solid-state nanopores, and has expanded into AI/ML data analytics, cost-reducing experimental consumables, and focused in-house R&D toward single-molecule proteomics.
Specification
The Spark-E2 is a solid-state nanopore fabrication unit that uses the cutting-edge Controlled Breakdown method. By allowing for the fabrication of two nanopores, this compact tool provides users with the pores they need to perform a wide range of single-molecule experiments in a rapid, simple, and cost-effective manner.
Number of Channels: 2
Current Range:± 1 µA (Fabrication Mode),±50 nA (Noise Measurement Mode)
Voltage Range ±17 V
Power Supply 110 V or 220 V AC
Size 172 mm x 80 mm x 48 mm
Weight ~2.5 kg
Optimal Conditions 10-30 nm SiNx
These Sensing Cages interface NNi flow cells with most commercial current amplifiers while protecting sensing experiments from electrical noise. Adaptations are available on demand for amplifiers not already supported.
Compatible with the following commercial amplifier head-stages:
Molecular Devices, Axopatch 200B; Multiclamp 700B
Elements srl, eONE, Nanopore Reader, 10 MHz Amplifier
Chimera Instruments, see page 6 for adapter for VC100
HEKA, HEKA EPC
Warner, BC535
Customizations available for other amplifiers on request.
Flow Cells: These reusable flow cells are specifically designed to be used with the Spark-E2 nanopore fabrication unit and with NNi sensing cages. Flow-through design and small internal volumes facilitates buffer exchange and minimizes sample waste.
Volume (clipping part): 25 µL
Volume (socket part) :40 µL
Assembled Size: 27 mm x 16 mm x 23 mm
Fastener: Screw
Powerful analysis tools simplify and accelerate postprocessing of nanopore data. NNi’s suite of tools is designed specifically with nanopore research in mind, with an ever-growing list of features driven by feedback from our users.
Operating System: Windows.
Supported Input Data Formats: bin (NNi software), .abf (ABF2, and some ABF1) .log (Chimera VC100), .dat (Elements eOne), and arbitrary binary formats
Output Format: csv
Accessories:
Disposable Ag/AgCl electrodes provide low-noise current sensing with no maintenance requirements.
Caps compatible with NNi electrodes form an air-tight seal that prevents evaporation for months.
Precisely cut gaskets seal the membrane in the flow cell and direct the flow of sample solution.
This tough PTFE jig holds up to 19 chips and fits in a 100mL beaker for easy cleaning with Piranha or other solvents.
因用于机器人各方面应用且与大多数机器人类型兼容,AutoCal系统可以检测出机器人自身构造和工具中心点(TCP)的 突然改变或偏离,并且该系统无需人为干涉就自动地更正这些误差。
AutoCal系统-Dynalog的先进水平校准技术,Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统,被应用于离线的机器人单元校准,并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中,该系统专为程序控制和复原而设计的,价格低廉。
AutoCal系统提供在线的机器人校准方案,旨在快速和自动地保证机械设备的工作性能。因用于机器人各方面应用且与大多数机器人类型兼容,AutoCal系统可以检测出机器人自身构造和工具中心点(TCP)的 突然改变或偏离,并且该系统无需人为干涉就自动地更正这些误差。这意味着不用猜测哪里会出错,不用浪费宝贵时间在机器人程序重复校准上,产品品质无任何损失。
AutoCal系统-Dynalog的先进水平校准技术,Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统,被应用于离线的机器人单元校准,并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中,该系统专为程序控制和复原而设计的,价格低廉。