MULTI-CHANNEL HARDNESS DEPTH TESTER

• 详细介绍
• 详细参数

• 详细介绍

  Basic Introduction:

  Surface hardening improves the wear resistance and fatigue strength of dynamically stressed components. These functional characteristics are mainly determined by surface hardness, hardening depth and residual stress.

  An essential quality feature of the surface hardening process is the thickness of the hardened layer (SHD). Currently, the hardened layer can only be tested in random samples using destructive methods, a procedure that is both costly and time-consuming.

  In cooperation with the Fraunhofer Institute for Non-Destructive Testing (IZFP), we have developed an ultrasonic test instrument for fast and easy SHD control. Reduced efforts and costs for testing facilitate rapid production control for a consistently high level of quality. The test instrument is used to optimize manufacturing parameters, reduce downtimes after inductor changes, for production monitoring and quality control.

  
  

  Product Advantages:

  short setup times

  simple, uncomplicated calibration

  fast and easy scanning

  high test sensitivity

  comfortable sensor handling

  sensor adaptable to complex geometries

  visualization of the current test point

  testing at small radii and undercuts possible

  individual report templates

  storage of results in data base

  analysis and revaluation of test results

  line scans and circumferential scans

  automation possible

  
  

  Application：

  Complex geometries hardness depth tester, mainly applied in the wind energy field and automotive industry.

  
  

  Specification

  4 ultrasonic channels

  built for industrial use (IP65)

  portable for mobile use

  inspection frequencies: 5 – 25 MHz

  measurement repeatability: ± 0.2 mm

• 详细参数

• 产品特色

  因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。

• 详细介绍

  AutoCal系统提供在线的机器人校准方案，旨在快速和自动地保证机械设备的工作性能。因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。这意味着不用猜测哪里会出错，不用浪费宝贵时间在机器人程序重复校准上，产品品质无任何损失。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。