MWL120劳厄相机

• 详细介绍
• 详细参数

• 详细介绍

  Detailed introduction:

  
  

  The MWL120 real-time reflection Laue camera system uses the reflection and transmission of the X-ray irradiated sample to determine the orientation of the single crystal, the integrity of the single crystal, the symmetry of the crystal, the observation of the general defects of the crystal, and the photographing of the structure phase of the plate and bar. Determine lattice constant, determine residual stress, etc. Therefore, it can be widely used in petrochemical, metallurgy, machinery, geology, textile, semiconductor production, solar cell production and other industrial sectors, scientific research institutions and universities.

  
  

  
  

  
  

  Features:

  
  

  1. Large effective detection range

  
  

  • It can detect large crystals of 750px×750px, because it gives enough working space, so it ensures that its orientation speed is fast enough. And mwl120 has a maximum load of 50kg, which is convenient for many researchers to study large crystals.

  
  

  
  

  
  

  2. High sensitivity

  • Single-photon X-rays can be counted from the noise of electronic detectors. In this way, a high-contrast Laue image can be obtained in a few seconds, which is also a necessary condition for observing the real-time Laue mode. A typical single crystal silicon sample can achieve one-second orientation.

  
  

  
  

  
  

  3. High angular sensitivity

  
  

  When the 3-axis goniometer rotates the sample, the detector can accurately read the angle of rotation θ change, which can be accurate to 0.05°, so that we can get more accurate orientation results

  
  

  
  

  
  

  4. Fast detection speed

  
  

  The photosensitive plate of the Mwl Laue camera collects diffraction points and converts them into electrical signals. It only takes 1-10 seconds to automatically collect and analyze data according to the deviation of the orientation angle. Ecuador image. Even the orientation of a sample with a completely unknown direction only takes about one minute, which is much faster than some ordinary CCD orientation instruments.

  
  

  
  

  
  

  5. Low maintenance cost

  
  

  The maintenance cost of Mwl120 is very low. Its detector is composed of 90% Ar and 10% CO2, which guarantees that it will not lose the sensitivity of the detector after more than 20 years of use. During this period, only half a year to replace the detector gas, which can be purchased from the local natural gas supplier; to replace the coolant once a year, only a few gallons of distilled water (and the price is relatively low).

  
  

  
  

  
  

  6. The sample can be rotated

  
  

  The maintenance cost of Mwl120 is very low. Its detector is composed of 90% Ar and 10% CO2, which guarantees that it will not lose the sensitivity of the detector after more than 20 years of use. In the meantime, only half a year to replace the detector gas, which can be purchased from the local natural gas supplier; to replace the coolant once a year, only a few gallons of distilled water (and the price is relatively low).

  
  

  
  

  
  

  
  

  
  

• 详细参数

  MWL120 Detector Specifications

  Active Detector Area:

  30 cm x 30 cm Detector Sensitivity: Single photon (x-ray)

  Readout Scheme:

  Continuous Angular Sensitivity: 0.05 degrees

  Detector Speed:

  1 second to collect a Laue pattern to determine the orientation angles of silicon Detector Lifetime: 10 – 20 years or more with no loss of sensitivity Sample Stage Specifications

  Goniometer Type

  Motorized 3-axis with remote control Goniometer Angular Range Horizontal ±85°, vertical -35/+60°, phi 360°

  Sample Translation

  Motorized horizontal and vertical Translation Stage Range of Motion 10 cm horizontal, 6.7 cm vertical

  Translation Stage Maximum Weight

  50 kg

  
  

• 产品特色

  因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。

• 详细介绍

  AutoCal系统提供在线的机器人校准方案，旨在快速和自动地保证机械设备的工作性能。因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。这意味着不用猜测哪里会出错，不用浪费宝贵时间在机器人程序重复校准上，产品品质无任何损失。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。