Permeability muscle fiber testing system

• 详细介绍
• 详细参数

• 详细介绍

  Technical features of Aurora 1400A permeability muscle fiber testing system:

  √ Simplified and efficient system: measuring a single muscle fiber with a force resolution of 0.01μN

  √ With eight bath point temperature controllable platforms, revolutionary automatic indexing and real-time Linux operating software system

  √Able to measure and control the strength, length and muscular interval length, can provide force-pCa, the relationship between tension and length, the relationship between force and contraction rate, the test experiment of hardness, relaxation experiment, the measured force value kurtosis: 0.5mN Up to 100mN

  
  

  Aurora Scientific understands the versatility and application of muscle fiber research, so we designed the 1400A series system to allow relevant researchers to accurately measure the various properties of the fiber. The system has a reliable and temperature-controllable test device. The device is equipped with a micron-level XYZ position regulator to adjust the position of the force sensor and the high-speed length controller. In addition, there is a groundbreaking function. The device has a platform that can be controlled by a software program. There are eight small baths on the platform. Specific baths can be automatically transferred to a specific location, and the sequence of movement can also be pre-programmed. .

  
  

  Technical principle:

  The 1400A system is designed to increase experimental output and simplify complex muscle fiber experiments. They can provide accurate muscle fiber performance measurements in a wide range of applications and tests. It is a breeze to use our automatic indexing bath board to perform forced pCa experiments. Pre-program the calcium concentration and activation/relaxation sequence to let the 1400A system do the rest.

  Includes temperature control equipment, including XYZ micrometer level, with built-in mounts for our high-speed length controllers and force sensors. The bathtub controller adopts unique software and is equipped with a programmable motion control sequencer, which is used to automatically transmit the optical fiber under study in the bathtub. It also includes a high-speed length controller, precision force sensor, data acquisition hardware and our unique real-time Linux control and analysis software.

  Our dedicated software includes a library of experimental protocols, which simplifies the process and makes it easy to measure force and length. When combined with our optional HVSL/VSL sarcomere length measurement system, researchers can control and measure length, force and sarcomere length. These advanced features allow researchers to fully characterize permeabilized fibers and perform all standard tests including force-pCa, kTr, length tension, force-speed and stiffness.

  The Aurora Scientific Translucent Fiber Test System is made of corrosion-resistant materials and can be easily installed on an inverted microscope for basic observation or more complex imaging.

  
  

  Application areas:

   Muscle Physiologist

   Sports scientist

   Metabolism & Cardiologist

   Bioengineering & Biology

   Geneticists

   Neuroscientist

   Pharmacologist & Biochemist

   Comparative biologist

   Gerontologist

   Involved in studying muscle function

  
  

  Applications

  1400A-Durable system helps researchers study thousands of muscle fibers

  
  

  challenge

  In 2004, Dr. Hans Degens was studying changes in skeletal muscle function and morphology. Dr. Degens is looking to use permeabilized muscle fibers as his test samples because they represent a pure system for studying bridge mechanics without prejudice and artifacts. Dr. Degens is familiar with experimental methods using skin muscle fibers, but lacks the resources to build a system from scratch to handle the higher throughput requirements of testing human samples.

  
  

  solution

  Aurora Scientific recently released the 1400A system. The system has an automatic indexing room, which can maximize fiber throughput. The design also eliminated any manual bath movement that was usually found in the design at the time, thereby protecting the sensitive transducer from damage. Dr. Degens' system is also the first temperature control function to use Peltier drive, which can achieve a very stable and accurate bath temperature, which is very important for these measurements. The powerful 600A digital controller allows almost every experimental program to be executed by the instrument itself.

  
  

  result

  This system has been continuously used in Dr. Degens' laboratory for the past 11 years, and has helped him collect many influential and attractive research data on exercise physiology, comparative biology and cardiovascular health. The initial partnership with Aurora Scientific also led to other projects in the entire muscle physiology.

• 详细参数

  1400A specifications:

  322C-I High Speed Length Controller

  403A Fast response and high resolution force sensor

  600A full set of data acquisition and CNC system

  802D-Permeability muscle fiber testing device

  701C-High Energy Biphasic Stimulator

  
  

• 产品特色

  因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。

• 详细介绍

  AutoCal系统提供在线的机器人校准方案，旨在快速和自动地保证机械设备的工作性能。因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。这意味着不用猜测哪里会出错，不用浪费宝贵时间在机器人程序重复校准上，产品品质无任何损失。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。