上海埃飞科技
Worldwide Technology(S. H)
上海埃飞科技
Worldwide Technology(S. H)产品展示
Infrared thermal imaging microscope
As electronic devices continue to shrink, heat generators and heat dissipation have become more and more important. The miniature thermal microscope can measure and display the temperature distribution on the surface of the semiconductor device, so that h
As electronic devices continue to shrink, heat generators and heat dissipation have become more and more important. The miniature thermal microscope can measure and display the temperature distribution on the surface of the semiconductor device, so that hot spots and thermal gradients can show the location of the defect, which usually leads to a decrease in efficiency and rapid detection of early failures.
application
Detect hot spots and defects of the chip
Electronic components and circuit board fault diagnosis and junction temperature measurement
Identify chip bonding defects and measure thermal resistance devices
Laser diode performance and failure analysis
Features
20 microns/pixel fixed focal length
50 degree wide-angle focusing lens
320*240 uncooled detector
30 frames per second shooting and display speed
0-300 degrees Celsius measurement range room temperature measurement
Easy to use-1 minute to install and measure on standby
Infrared thermal imaging supporting software
The software provides a wide range of analysis tools to help customers
Obtain temperature information very easily and quickly. Real-time band
Different perspectives and constructiveness of the picture, shooting and playback sequence
Data analysis methods
因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。
AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。
AutoCal系统提供在线的机器人校准方案，旨在快速和自动地保证机械设备的工作性能。因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。这意味着不用猜测哪里会出错，不用浪费宝贵时间在机器人程序重复校准上，产品品质无任何损失。
AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。