VIBRATING SAMPLE MAGNETOMETER

• 详细介绍
• 详细参数

• 详细介绍

  NMI Vibrating Sample Magnetometer combines high sensitivity (5×10⁻⁷ emu), excellent repeatability, and simple handling. NMI-VSM has an ergonomic design and software that facilitates the researcher's use. The VSM Drive Head is designed for easy and simple replacement of samples.
  

  
  

  
  Sample Holders
  
  Magnetization of Floppy Disk Sample
  High Measuring Range
  Temperature options include a cryostat, high-temperature oven, and single-stage variable temperature insert. The combined temperature range of the options is 2 K to 1000 K. The magnetic field with an electromagnet is 2.5 T; with the combination of a cryostat, the magnetic field is up to 14 T.
  VSM Measurement Parameters
  VSM oscillation frequency (calibrated): 1–100 Hz
  VSM oscillation amplitude range: 0.1 mm – 5 mm
  Sample size: up to 6 mm diameter
  Sensitivity Parameters
  RMS sensitivity: 5×10⁻⁷ emu
  High stability per day
  Excellent reproducibility
  System Properties
  Fast and easy to use with oven/cryostat always installed on the measurement system and ready for use
  Air-cooled magnet power supply
  Magnetic field ramp rate: determined by magnet and power supply
  Temperature and magnetic field may be ramped during the measurement
  Longitudinal Configuration
  RT System: Magnetic field is along the horizontal axis; VSM vibration and moment detection are along the vertical axis
  Cryogenic System: Magnetic field, VSM vibration, and moment detection all along the vertical axis, up to 14 T magnetic field
  Cryogenic System Properties
  Geometry: Sample holder suitable for bulk and thin film samples
  Sample holder configurable for parallel and vertical field measurements
  
  Applied Field [H](kA/m) Co Thin Film
  
  Applied Field [H] (Oe) Ni Powder
  

• 详细参数

• 产品特色

  因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。

• 详细介绍

  AutoCal系统提供在线的机器人校准方案，旨在快速和自动地保证机械设备的工作性能。因用于机器人各方面应用且与大多数机器人类型兼容，AutoCal系统可以检测出机器人自身构造和工具中心点（TCP）的 突然改变或偏离，并且该系统无需人为干涉就自动地更正这些误差。这意味着不用猜测哪里会出错，不用浪费宝贵时间在机器人程序重复校准上，产品品质无任何损失。

  AutoCal系统-Dynalog的先进水平校准技术，Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统，被应用于离线的机器人单元校准，并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中，该系统专为程序控制和复原而设计的，价格低廉。